|
|
|
|
Dynamic 2CC SE Kit (center channel)
The Dynamic 2CC kit is designed to match the rest of the
Dynamic Series. This center channel will work well with the
Dynamic 2T tower or 4T mains. Use the Dynamic 0.5 or
Dynamic 1S as surrounds in a 5.1 or 7.1 system. The cabinet
features a separate sealed chamber for the midrange and a bass
reflex ported alignment for the woofers to extend the bass down
to 42hz anechoic.
The RS180-8 bass driver is from the Dayton Reference Series line,
and in our opinion, offers an excellent value in price to
performance. The midrange unit is the very light titanium coned
Tang Band W4-1337 driver, which contains a shorting ring in
the neo magnet based motor. This provides a smooth response
and lower harmonic distortion. The tweeter is the Scan Speak
D2608/9130 HDS tweeter, which is extremely popular in the DIY
scene because of its excellent performance and airy top end detail.
It also features an advanced motor which allows it to play loud
without strain.
This kit is designed to work well in a custom enclosure that can
either be built by CLD or the DIYer. After the kit is purchased,
the cabinet plan is forwarded to the customer.
The Dynamic 2CC crossover comes professionally assembled on a
pair of circuit boards. High quality parts are used throughout
the parallel circuits, including film capacitors and air core
inductors. The series tweeter circuit uses metal oxide resistors
and Solen capacitors, while the series woofer circuit uses a low
DCR Sledgehammer inductor. Many options are available for
this kit, so be sure to email us for a quote if you have specific
requirements or use the paypal button to place your order for the
stock design.
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
Specifications:
Frequency Response: 42hz-20khz +/-2dbs (Measurements)
Impedance: 4 ohms (high current amplifier recommended)
Sensitivity: 88db 2.83v/meter
Bass Alignment: Bass Reflex
Dimensions: 9.25"H, 29"W, 15.75"D (Cabinet Drawing PDF)
Shipping Weight:
Drivers: Scan Speak HDS, TB W4-1337, Dayton RS180-8
Crossovers: Solen caps, Mundorf resistors, air core inductors
Pricing (kit contents - each):
Full kit: $610.00 (shipping quote below is for US48)
(2) Dayton RS180-8, (2) Tang Band W4-1337 (1) Scan Speak
D2608/9130 HDS, (1) assembled crossover, dampening
materials, binding posts, wire, screws, connectors, ports, plans.
|
|
|
|
(If not in US48, email for quote)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
