|
|
|
M5 Kit (pair)
The M5 speaker kit is designed to match the rest of the M Series
when staying on a strict budget is a main factor, and if the
customer wants the smooth sound offered by the SB Acoustics
drivers and Scan Speak ring radiator tweeter. Several of these
speakers can make up the surrounds in a 5.1 or 7.1 system or
work well on their own in a 2 channel setup. The M5 speaker
works well near a wall, as long as the rear port has room to
breathe.
Both drivers are of the very highest quality, and in our opinion,
offer an excellent value in price to performance. The mid/bass
unit is the SB Acoustics SB15NRXC30-8, a 5.5” paper cone driver
with a copper sleeve in the magnet system. This provides a
smooth response and lower harmonic distortion. The tweeter is
the silky smooth Scan Speak R2604/8330, which is extremely
popular in the DIY scene because of its excellent performance and
sweet sound. It also features an advanced motor which allows it
to play without strain at reasonable output levels.
This speaker is designed to work well in the finished Parts
Express .38ft3 cabinets with a rear port, although they can also
be used in a sealed enclosure with a higher F3 point. The
optional cabinets come in a cherry, maple, or black gloss finish.
The M5 crossovers come professionally assembled on a circuit
board. High quality parts are used throughout the parallel
circuits, including film capacitors and air core inductors. The
series tweeter circuit uses metal oxide resistors and Solen
capacitors, while the series woofer circuit uses a low DCR air-core
inductor. Many options are available for this speaker, so be sure
to email us for a quote if you have specific requirements.
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
Specifications:
Frequency Response: 55hz-20khz +/-2.5dbs (Measurements)
Note: Measurements conducted in final assembled speaker
Impedance: 8 ohms
Sensitivity: 85db 2.83v/meter
Bass Alignment: Bass Reflex
Dimensions: 14"H, 8"W, 10.5"D
Shipping Weight:
Drivers: Scan Speak R2604/8330, SB Acoustics SB15NRXC30-8
Crossovers: Solen caps, Mundorf resistors, air core inductors
Pricing:
Now available fully assembled in a PE cabinet. Contact us for
current pricing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
