|
|
|
Minuet 5CC Kit (center channel)
The Minuet 5CC kit is designed to match the rest of the Minuet
Series and is for the customer who demands extremely high
performance without worrying about the cost to reach this level.
The Minuet 5CC, a perfect match for the Minuet5B mains, will
work well near a wall, as long as the rear port has room to
breathe. A custom cabinet can also be built if you need a front
firing port.
Both Revelator drivers are of the very highest quality, and in our
opinion, offer performance to back up the higher costs. The
mid/bass unit is the Scan Speak 15W4531G, a 5.5” uncoated paper
cone driver with an advanced motor. This provides a smooth
response, lower harmonic distortion, and improved bass clarity.
The tweeter is the dynamic sounding Air Circ 6600, which is
extremely popular in the DIY scene because of its excellent low
THD and extended response. It also features an advanced motor
which allows it to play without strain at reasonable output levels.
This kit is designed to work well in the finished Parts Express
.75ft3 cabinets with a rear port, although they can also be used in
a sealed enclosure with a higher F3 point. The optional cabinets
come in a cherry, maple, or black gloss finish. After the kit is
purchased, the cabinet plans are forwarded to the customer. The
Minuet 5CC crossovers come professionally assembled on a
circuit board. High quality parts are used throughout the
parallel circuits, including film capacitors and air core inductors.
The series tweeter circuit uses metal oxide resistors and Clarity
Cap PX capacitors, while the series woofer circuit uses a low DCR
air-core inductor. Many options are available for this kit, so be
sure to email us for a quote if you have specific requirements or
use the paypal button to place your order for the stock design.
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
Specifications:
Frequency Response: 45hz-20khz +/-2dbs
Impedance: 8 ohms
Sensitivity: 85db 2.83v/meter
Bass Alignment: Bass Reflex
Dimensions: 20"H, 8"W, 13"D
Shipping Weight:
Drivers: Scan Speak Air Circ 6600, Scan Speak 15W/4531G
Crossovers: Clarity Cap PX, Mundorf resistors, air core inductors
Pricing (kit contents - each):
Full kit: $860.00 (shipping quote below is for US48)
(2) Scan Speak 15W4531G, (1) Scan Speak Air Circ 6600, (1)
assembled crossover, dampening materials, binding posts, wire,
screws, connectors, ports. Cabinets not included.
|
|
|
|
(If not in US48, email for quote)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
