|
|
|
Dynamic 2T RS Kit (pair)
The Dynamic 2T RS kit is designed to match the rest of the
Dynamic Series. This tower will work well with the Dynamic
2CC RS center channel or 4CC RS center channel. Use the
Dynamic 0.5 or Dynamic 1S RS as surrounds in a 5.1 or 7.1
system. The cabinet features a separate sealed chamber for the
midrange and a bass reflex ported alignment for the woofers to
extend the bass down to 42hz anechoic.
The RS180-4 bass driver is from the Dayton Reference Series line,
and in our opinion, offers an excellent value in price to
performance. The bargain midrange unit is the Dayton RS125-8
driver. While not as transparent as the Tangband W4-1337, it is
very neutral and clean because of its excellent motor. This
provides a smooth response and low harmonic distortion. The
tweeter is the Dayton RS28F which is also a great value. While
not quite as detailed as the Scan Speak D2608/9130 HDS, it gets
one very close in performance for a lot less money.
This kit is designed to work well in a custom enclosure that can
either be built by CLD or the DIYer. After the kit is purchased,
the cabinet plans are forwarded to the customer.
The Dynamic 2T RS crossovers come professionally assembled on
a pair of circuit boards. High quality parts are used throughout
the parallel circuits, including film capacitors and air core
inductors. The series tweeter circuit uses metal oxide resistors
and Solen capacitors, while the series woofer circuit uses a low
DCR Sledgehammer inductor. Many options are available for
this kit, so be sure to email us for a quote if you have specific
requirements or use the paypal button to place your order for the
stock design.
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
Specifications:
Frequency Response: 42hz-20khz +/-2dbs (Measurements)
Impedance: 4 ohms (high current amplifier recommended)
Sensitivity: 88db 2.83v/meter
Bass Alignment: Bass Reflex
Dimensions: 43"H, 8.5"W, 13.5"D (Cabinet Drawing PDF)
Shipping Weight:
Drivers: Dayton RS28F, Dayton RS125-8, Dayton RS180-8
Crossovers: Solen caps, Mundorf resistors, air core inductors
Pricing (kit contents - pair):
Full kit: $950.00 (shipping quote below is for US48)
(4) Dayton RS180-8, (4) Dayton RS125 (2) Dayton RS28F, (2)
assembled crossovers, dampening materials, binding posts,
wire, screws, connectors, ports, plans.
|
|
|
|
(If not in US48, email for quote)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
